Video instructions
Video on changing the ribbon
Follow these simple steps to change the ribbon of your DPG07 measuring device.
Step by step
5 simple steps
- Opening the printer cover
- Remove the old ribbon by pressing the “Push” button
- Thread the paper through the new ribbon
- Insert and secure the ribbon by first pressing Push (right side), then the left side (tip: if it does not click into place, you can use the wheel to find the correct position)
- Thread the paper through the printer cover and close it.
Useful accessories
Where can I buy a new ribbon?
You can obtain new ribbons from your specialist dealer or in our online store!
Item no. 73095
USB charging cable for WPS FUNK (new generation with magnetic plug and rotary switch for switching on and off since May 2024)
Charging cable for WPS FUNK from 5/24 with USB (type A) to magnetic adapter
Item no. 233
Cylindrical rubber sealing plug (blue) d = 12.0 mm
- for pipes DN12, 3/8″
- Suitable up to max. 4 bar test pressure
- The blue rubber is compressed by turning the wing nut, which closes the tube.
- For sealing pipe openings
Item no. 76058S
Shut-off bladder DN 100 with extension hose (1 m) and ball valve with plug nipple NW 2.7
Loadable up to max. 0.4 bar
Item no. 76059S
Shut-off bladder DN 50 with extension hose (1 m) and ball valve with plug nipple NW 2.7
Can be loaded up to max. 0.4 bar
Item no. 70175
Consisting of differential pressure test hose with NW 2.7 couplings and
silicone hose with 4.0 x 1.0 x 90 mm plug-in nozzle
Item no. 60103
Top cutting roller complete, screw connection and shim washers for HSG
Item no. 66151
Replacement plastic jaw set for WDF XP
incl. mounting material
Item no. 60105
Lower cutting roller complete, screw connection and shim washers for HSG
Item no. 60111
Cutting roller set with
- bottom complete, screw connection and 1 shim washer for HSG
- Top complete, screw connection and 3 shims for HSG
Item no. 75707
Set for DPG07 TOUCH consisting of
- 5x paper rolls
- 2x ribbons
- 1x leak detector spray
