Item no. 337
High-Pressure Sensor WPS KABEL
Accessories DPG07, DPG02, LM06
The top addition: the External digital pressure sensor up to max. 20 bar for the RAU test devices LM06, DPG02 and DPG07 TOUCH
Leak and stress test of drinking water installations, heating and solar systems with compressed air, inert gas or water. Long-term measurement with freely selectable interval time.
Leak and stress test of drinking water installations, heating and solar systems with compressed air, inert gas or water. Long-term measurement with freely selectable interval time.
High pressure sensor
Testing up to 20 bar
Check pipes extensively
Drinking water, heating, solar, inert gas or water
Easy handling
Safe and easy to work with
Technical details
Services
The WPS cable is an excellent companion for your RAU measuring devices such as the DPG07, DPG02 and LM06.
Long-term measurements are also possible.
You can find all the advantages here:
- Leak and stress test of water pipes with water or air as a medium in accordance with DIN EN 806-4 from 0.3 bar to a maximum of 20 bar
- Pressure sensor with 3 meter long USB connection cable for LM06, DPG02 or DPG07 TOUCH
- Digital pressure sensor installed in stainless steel housing
- Threaded adapter for connecting WPS and pipe
- Save measured values, data transfer to computer with printout as protocol and diagram (only with LM06 or DPG07 TOUCH)
Applications
Water pipe tests
Testing the water pipe
Stress test with air as medium
Pressure build-up with optional pressure pump DPL Art. no. 332
Stress test with water as a medium
Extension: Fine thread Adapter for testing
Final examination
The FGP adapter set saves you time, because “… there is no need to search for the right connection.”
Function
Connect the external pressure sensor WPS quickly and cleanly to the fitting using the FGP adapter.
Fine thread test adapter set
Small, handy and quick to install – the clean solution for connecting external WPS and sanitary fittings. Leak tests with long-term measurements can be carried out quickly and cleanly after final assembly with the help of the adapters for testing the fittings.
Scope of delivery
- External pressure sensor WPS cable for LM06, DPG02 or DPG07 TOUCH
- Thread test pieces GPW 1/2″ and 1″, GPW 3/4″ and 1 1/4″
- Teflon tape / sealing tape
- Plastic case
EAN GTIN
WPS CABLE: 4262453340324
Item no. 73095
USB charging cable for WPS FUNK (new generation with magnetic plug and rotary switch for switching on and off since May 2024)
Charging cable for WPS FUNK from 5/24 with USB (type A) to magnetic adapter
Item no. 233
Cylindrical rubber sealing plug (blue) d = 12.0 mm
- for pipes DN12, 3/8″
- Suitable up to max. 4 bar test pressure
- The blue rubber is compressed by turning the wing nut, which closes the tube.
- For sealing pipe openings
Item no. 76058S
Shut-off bladder DN 100 with extension hose (1 m) and ball valve with plug nipple NW 2.7
Loadable up to max. 0.4 bar
Item no. 76059S
Shut-off bladder DN 50 with extension hose (1 m) and ball valve with plug nipple NW 2.7
Can be loaded up to max. 0.4 bar
Item no. 70175
Consisting of differential pressure test hose with NW 2.7 couplings and
silicone hose with 4.0 x 1.0 x 90 mm plug-in nozzle
Item no. 60103
Top cutting roller complete, screw connection and shim washers for HSG
Item no. 66151
Replacement plastic jaw set for WDF XP
incl. mounting material
Item no. 60105
Lower cutting roller complete, screw connection and shim washers for HSG
Item no. 60111
Cutting roller set with
- bottom complete, screw connection and 1 shim washer for HSG
- Top complete, screw connection and 3 shims for HSG
Item no. 75707
Set for DPG07 TOUCH consisting of
- 5x paper rolls
- 2x ribbons
- 1x leak detector spray
