Item no. 324
Pressure Measuring Device
DPG02 TOUCH
Professional measuring device for natural gas, water, waste water and much more.
The measuring device for water, waste water, liquefied petroleum gas, solar, heating and many applications in building installations supports beginners and professionals. Carry out load and leak tests on natural gas pipes or individual measurements. Quick deployment on site without time-consuming preparation. More safety thanks to automatic test sequences.
Everything in one case
Suitable for construction sites and small and handy
Simple operation
with automatic test sequence
DVGW certified
and Made in Germany
The simple test procedure
Testing can be that easy
1
Select test or measurement
2
Establish connection between DPG and pipe
3
Start test via TOUCH control panel
4
Test sequence is automatic
5
Printout of the test report
What the DPG02 TOUCH can do
Services and functions
Pressure measuring device for natural gas, water, waste water and
many applications in building installations
- Load and leak test of natural gas pipes (1 bar / 150 hPa) in accordance with TRGI 2018
- Load and leak test of liquefied gas pipes (1 bar / 150 hPa) according to TRF 2021
- Long-term measurement up to 1,000 hPa (1.0 bar), recording of pressure and ambient temperature with freely selectable interval times from 15 sec. to 6 hours with continuous printout
- Usability test at operating pressure 24, 50, 70 and 100 hPa in accordance with TRGI 2018 without determining the pipe volume, leakage measurement certified in accordance with DVGW-G 5952, no additional feed-in device required!
- Leak and stress test of water pipes with air (150 hPa/3 bar) in accordance with DIN EN 806-4 (with external pressure sensor WPS; optional)
- Leak test of water pipes with water as the medium (0.3 to 20 bar or 0.03 to 2 MPa) in accordance with DIN EN 806-4 (with ext. WPS; optional)
- Testing of heating systems and solar systems in accordance with DIN 18380 (with external WPS; optional)
- Final inspection of water pipes after final assembly (with external WPS and FGP; optional)
- Leak test of wastewater pipes (100 hPa) according to DIN EN 1610, test method LC
- Flow pressure measurement up to 300 hPa accurate to 0.1 hPa
- Built-in dot matrix printer to print out measurement data on site in document quality
- Built-in mini-compressor up to max. 1 bar (0.1 MPa)
- Automatic test sequence
- Microprocessor-controlled 0-point calibration (adjust to ambient air pressure)
- Touch control panel
- Battery operation possible
- Everything in one case: Items for testing, adapters, accessories have a designated place in the foam insert
The tool
Unbeatable advantages
The DPG02 TOUCH is a well-thought-out device that has been developed from practical experience.
This offers you many advantages in your day-to-day work:
- DVGW certified
- Large scope of testing (natural gas, leakage, liquefied petroleum gas, water, heating, waste water, solar, etc.)
- Automatic test sequences guarantee simple operation
- Built-in dot matrix printer for durable printouts
- Built-in mini-compressor up to max. 1 bar / 0.1 MPa
- Individual measurements with freely selectable pressure and interval times
- Everything is there and in the right place thanks to the foam insert with fixed slots for accessories
- L-BOXX plastic case for safe transportation
- TOUCH control panel
- Quality product developed and manufactured in Germany
The illustrations may contain special accessories that are not included in the standard scope of delivery.
Leak test of a water pipe with optional accessory WPS KABEL (item no. 337)
You can check these pipes
Large audit scope
- natural gas
- Leakage quantity (usability test)
- liquefied petroleum gas
- Water (with medium air and medium water)
- Heating
- waste water
- Solar
- Individual measurements (with freely selectable pressure and interval times)
- and many more ...
EAN GTIN
DPG02 TOUCH: 4262453340355
RAU measuring devices comparison
Comparison
| DPG07 TOUCH | DPG02 TOUCH | |
|---|---|---|
| true | false | Larger audit scope |
| true | true | Built-in printer and mini compressor |
| true | true | Battery & mains operation |
| true | false | Storage of customer data records |
| true | false | Data management on the PC / software |
| true | false | More space for accessories |
| true | false | Data transmission via wireless sensor |
| true | false | Negative pressure measurement |
Youtube
Videos
You can find many helpful videos about the DPG02 TOUCH on our YouTube channel.
Info
Scope of delivery
- DPG02 TOUCH test device with built-in dot matrix printer
- Test hose for pressure and leak tests (yellow)
- Silicone hose for operating pressure measurement
- Y-hose adapter
- Replacement paper roll, ballpoint pen with touch pen
- Mains charger for 230 V at 50 Hz
- Operating instructions
- Sturdy plastic case
- Large selection of optional accessories
Ready for all applications
Useful accessories
A wide range of optional accessories is available for this device for every application. For individual advice and selection of suitable accessories, please contact your specialist dealer or contact us directly.
Item no. 76089
Shut-off bladder DN 300, robust and hard-wearing design
Can be loaded up to max. 2.5 bar
RAU Shut-off bladder DN 300 mm, for APS SOFT
Art. No. 76089
Item no. 76088
Shut-off bladder DN 250, robust and hard-wearing design
Can be loaded up to max. 2.5 bar
RAU Shut-off bladder DN 250 mm, for APS SOFT
Art. No. 76088
Item no. 76087
Shut-off bladder DN 200, robust and hard-wearing design
RAU Shut-off bladder DN 200 mm, for APS SOFT
Can be loaded up to max. 2.5 bar
Art. No. 76087
Item no. 76086
Shut-off bladder DN 150, robust and hard-wearing design
Can be loaded up to max. 2.5 bar
RAU Shut-off bladder DN 150 mm, for APS SOFT
Art. No. 76086
Item no. 448
Thread test piece for water with pneumatic connection NW 7.2, GPW 2 1/2″
Thread test adapter
Art. No. 448
Item no. 447
Thread test piece for water with pneumatic connection NW 7.2, GPW 2″
Thread test adapter
Art. No. 447
Item no. 73744
Two in one: ballpoint pen (blue) and touch function for operating the measuring device display, all the details:
- Twist action ballpoint pen made of lacquered metal
- Touch function for operating the measuring device display, cell phones, tablets, etc.
- incl. RAU laser engraving
- Ink color: blue, indelible
- Color: blue
- Refill replaceable
- DPG TOUCH Pen Pen / Ballpoint pen SlimLine Touchpen
Item no. 99001
Limited edition bottle opener with key ring, size: 75 x 10 x 3 mm
- High-quality aluminum
- RAU logo laser engraved on the top
- incl. key ring
Item no. 443
Threaded test piece for gas with pneumatic connection NW5, GPG 2 1/2″
Art. No. 443
Item no. 442
Threaded test piece for gas with pneumatic connection NW5, GPG 2″
Art. No. 442