Item no. 324
Pressure Measuring Device
DPG02 TOUCH
Professional measuring device for natural gas, water, waste water and much more.
The measuring device for water, waste water, liquefied petroleum gas, solar, heating and many applications in building installations supports beginners and professionals. Carry out load and leak tests on natural gas pipes or individual measurements. Quick deployment on site without time-consuming preparation. More safety thanks to automatic test sequences.
Everything in one case
Suitable for construction sites and small and handy
Simple operation
with automatic test sequence
DVGW certified
and Made in Germany
The simple test procedure
Testing can be that easy
1
Select test or measurement
2
Establish connection between DPG and pipe
3
Start test via TOUCH control panel
4
Test sequence is automatic
5
Printout of the test report
What the DPG02 TOUCH can do
Services and functions
Pressure measuring device for natural gas, water, waste water and
many applications in building installations
- Load and leak test of natural gas pipes (1 bar / 150 hPa) in accordance with TRGI 2018
- Load and leak test of liquefied gas pipes (1 bar / 150 hPa) according to TRF 2021
- Long-term measurement up to 1,000 hPa (1.0 bar), recording of pressure and ambient temperature with freely selectable interval times from 15 sec. to 6 hours with continuous printout
- Usability test at operating pressure 24, 50, 70 and 100 hPa in accordance with TRGI 2018 without determining the pipe volume, leakage measurement certified in accordance with DVGW-G 5952, no additional feed-in device required!
- Leak and stress test of water pipes with air (150 hPa/3 bar) in accordance with DIN EN 806-4 (with external pressure sensor WPS; optional)
- Leak test of water pipes with water as the medium (0.3 to 20 bar or 0.03 to 2 MPa) in accordance with DIN EN 806-4 (with ext. WPS; optional)
- Testing of heating systems and solar systems in accordance with DIN 18380 (with external WPS; optional)
- Final inspection of water pipes after final assembly (with external WPS and FGP; optional)
- Leak test of wastewater pipes (100 hPa) according to DIN EN 1610, test method LC
- Flow pressure measurement up to 300 hPa accurate to 0.1 hPa
- Built-in dot matrix printer to print out measurement data on site in document quality
- Built-in mini-compressor up to max. 1 bar (0.1 MPa)
- Automatic test sequence
- Microprocessor-controlled 0-point calibration (adjust to ambient air pressure)
- Touch control panel
- Battery operation possible
- Everything in one case: Items for testing, adapters, accessories have a designated place in the foam insert
The tool
Unbeatable advantages
The DPG02 TOUCH is a well-thought-out device that has been developed from practical experience.
This offers you many advantages in your day-to-day work:
- DVGW certified
- Large scope of testing (natural gas, leakage, liquefied petroleum gas, water, heating, waste water, solar, etc.)
- Automatic test sequences guarantee simple operation
- Built-in dot matrix printer for durable printouts
- Built-in mini-compressor up to max. 1 bar / 0.1 MPa
- Individual measurements with freely selectable pressure and interval times
- Everything is there and in the right place thanks to the foam insert with fixed slots for accessories
- L-BOXX plastic case for safe transportation
- TOUCH control panel
- Quality product developed and manufactured in Germany
The illustrations may contain special accessories that are not included in the standard scope of delivery.
Leak test of a water pipe with optional accessory WPS KABEL (item no. 337)
You can check these pipes
Large audit scope
- natural gas
- Leakage quantity (usability test)
- liquefied petroleum gas
- Water (with medium air and medium water)
- Heating
- waste water
- Solar
- Individual measurements (with freely selectable pressure and interval times)
- and many more ...
EAN GTIN
DPG02 TOUCH: 4262453340355
RAU measuring devices comparison
Comparison
| DPG07 TOUCH | DPG02 TOUCH | |
|---|---|---|
| true | false | Larger audit scope |
| true | true | Built-in printer and mini compressor |
| true | true | Battery & mains operation |
| true | false | Storage of customer data records |
| true | false | Data management on the PC / software |
| true | false | More space for accessories |
| true | false | Data transmission via wireless sensor |
| true | false | Negative pressure measurement |
Youtube
Videos
You can find many helpful videos about the DPG02 TOUCH on our YouTube channel.
Info
Scope of delivery
- DPG02 TOUCH test device with built-in dot matrix printer
- Test hose for pressure and leak tests (yellow)
- Silicone hose for operating pressure measurement
- Y-hose adapter
- Replacement paper roll, ballpoint pen with touch pen
- Mains charger for 230 V at 50 Hz
- Operating instructions
- Sturdy plastic case
- Large selection of optional accessories
Ready for all applications
Useful accessories
A wide range of optional accessories is available for this device for every application. For individual advice and selection of suitable accessories, please contact your specialist dealer or contact us directly.
Item no. 4175
The coupling is used to test water lines with compressed air.
The special test adapter is compatible with our FGP fine-thread test adapter set for drinking water testing.
! CAUTION !
Never connect a filled water line directly to the measuring device (yellow test hose)!
Item No. 4175
Item no. 66990
Set with stop and washers for TSCH XP Eaves Closer
The set consists of the stop (slotted hole), two washers, and the orange clamping lever, see image.
Item No. 66990
Item no. 66989
Long PVC jaws for Eaves Closer TSCH XP
, including rivets
Is the long PVC jaw on your Eaves Closer worn out? Simply replace it!
For seaming without scratching delicate surfaces and color-coated metal sheets.
Item No. 66989
EAN GTIN 4262453341383
Item no. 66988
Short PVC jaw with rubber insert for Eaves Closer TSCH XP
, including rivets
Is the short PVC jaw on your Eaves Closer worn out? Simply replace it!
For seaming without scratching delicate surfaces and color-coated metal sheets.
Item No. 66988
EAN GTIN 4262453341376
Item no. 66987
Replacement PVC jaws for the Eaves Closer TSCH XP
including rivets
Are the PVC jaws on your Eaves Closer worn out? Simply replace them with this set!
For seaming without scratches on sensitive surfaces and color-coated metal sheets.
Item No. 66987
EAN GTIN 4262453341369
Item no. 70130
External RADIO pressure sensor from 0.3 bar to 20 bar test pressure and test medium water or air. Suitable for DPG07 TOUCH.
Test and measure over longer distances without cables! (can also be used with LM06 and DPG02 via the USB charging cable supplied)
Application
Leak and load testing on pipes up to 20 bar: Leak and stress test of drinking water installations, heating and solar systems with compressed air, inert gas or water. Long-term measurements with freely selectable interval time. Even inadequate locations and long distances are possible wirelessly thanks to the radio connection.
- Leak and stress test of water pipes with water or air as a medium in accordance with DIN EN 806-4 from 0.15 bar (0.015 MPa) up to a maximum of 20 bar (2 MPa)
- Wireless pressure sensor ideal for DPG07 TOUCH – check and measure over longer distances without cables
- Can also be used with LM06 TOUCH and DPG02 TOUCH via magnetic charging cable
- WPS FUNK fits into the foam insert of the DPG07 TOUCH test instrument case
- Wireless pressure sensor
- USB charging cable and USB charger
Item no. 70115
External cable pressure sensor for test pressures from 0.3 to 20.0 bar, test medium water or air, suitable for RAU LM06 and DPG02 TOUCH or DPG07 TOUCH measuring devices.
Application
Leak and load testing on pipes up to 20 bar: Leak and stress test of drinking water installations, heating and solar systems with compressed air, inert gas or water. Long-term measurements with freely selectable interval time.
- Leak and stress test of water pipes with water or air as a medium in accordance with DIN EN 806-4 from 0.15 bar (0.015 MPa) up to a maximum of 20 bar (0.2 MPa)
- External pressure sensor suitable for LM06, DPG02 and DPG07 TOUCH
- Measuring armature with 3 meter USB cable for secure data transmission
- Cable pressure sensor
Item no. 76089
Shut-off bladder DN 300, robust and hard-wearing design
Can be loaded up to max. 0.4 bar
RAU Shut-off bladder DN 300 mm, for APS SOFT
Art. No. 76089
Item no. 76088
Shut-off bladder DN 250, robust and hard-wearing design
Can be loaded up to max. 0.4 bar
RAU Shut-off bladder DN 250 mm, for APS SOFT
Art. No. 76088