Item no. 341

Waste water test kit APS Soft

Accessories DPG07, DPG02, LM06

The flexible waste water test set: Leak test of waste water pipes in building installations.

Durable

You can rely on high quality

Check waste water

Leak test of wastewater pipes

Testing a condensing boiler stack and inflating the test bladder with bellows; test bladder in the cleaning opening of a waste water pipe.

Technical details

Services

The APS Soft optimally complements your RAU measuring devices for testing waste water pipes and condensing boilers.
You can find all the advantages here:

Testing of wastewater pipes in accordance with DIN EN 1610 using the LC "air" method and a test pressure of 100 hPa
Mainly used for testing newly installed wastewater pipes in domestic installations
Test bladder for diameters 50-150 mm with pneumatic connection for the DPG07, DPG02 and LM06 TOUCH
3 shut-off bladders for pipe diameters 50, 100 and 50-150 mm
Bellows for inflating the test and shut-off bladders
Test time depending on the pipe diameter and selectable on the test device
Save measurement results, transfer data to a PC and print out logs incl. Diagram on DIN A4 - only with DPG07 TOUCH and LM06 TOUCH
Other possible applications: Leak testing of condensing stoves (chimney testing)

Scope of delivery

EAN GTIN
APS SOFT: 4262453340348

WPS FUNK

Useful accessories

Pressure pump up to 3 bar DPL

Air pressure pump for oil-free inflation up to 3 bar

7.2-inch coupling to 5-inch push-on nipple

Item no. 4175

The coupling is used to test water lines with compressed air. The special test adapter is compatible with our FGP fine-thread test adapter set for drinking water testing. ! CAUTION ! Never connect a filled water line directly to the measuring device (yellow test hose)! Item No. 4175

Set with stop and washers for TSCH XP Eaves Closer

Item no. 66990

Set with stop and washers for TSCH XP Eaves Closer The set consists of the stop (slotted hole), two washers, and the orange clamping lever, see image. Item No. 66990

Replacement long jaw for Eaves Closer TSCH XP

Item no. 66989

Long PVC jaws for Eaves Closer TSCH XP , including rivets Is the long PVC jaw on your Eaves Closer worn out? Simply replace it! For seaming without scratching delicate surfaces and color-coated metal sheets. Item No. 66989 EAN GTIN 4262453341383

Replacement short jaw for Eaves Closer TSCH XP

Item no. 66988

Short PVC jaw with rubber insert for Eaves Closer TSCH XP , including rivets Is the short PVC jaw on your Eaves Closer worn out? Simply replace it! For seaming without scratching delicate surfaces and color-coated metal sheets. Item No. 66988 EAN GTIN 4262453341376

Replacement jaw set for Eaves Closer TSCH XP

Item no. 66987

Replacement PVC jaws for the Eaves Closer TSCH XP including rivets Are the PVC jaws on your Eaves Closer worn out? Simply replace them with this set! For seaming without scratches on sensitive surfaces and color-coated metal sheets. Item No. 66987 EAN GTIN 4262453341369

Eaves Closer XP with CCS

WPS FUNK – High-pressure sensor (radio to measuring device)

Item no. 70130

External RADIO pressure sensor from 0.3 bar to 20 bar test pressure and test medium water or air. Suitable for DPG07 TOUCH. Test and measure over longer distances without cables! (can also be used with LM06 and DPG02 via the USB charging cable supplied) Application Leak and load testing on pipes up to 20 bar: Leak and stress test of drinking water installations, heating and solar systems with compressed air, inert gas or water. Long-term measurements with freely selectable interval time. Even inadequate locations and long distances are possible wirelessly thanks to the radio connection.

Leak and stress test of water pipes with water or air as a medium in accordance with DIN EN 806-4 from 0.15 bar (0.015 MPa) up to a maximum of 20 bar (2 MPa)
Wireless pressure sensor ideal for DPG07 TOUCH – check and measure over longer distances without cables
Can also be used with LM06 TOUCH and DPG02 TOUCH via magnetic charging cable
WPS FUNK fits into the foam insert of the DPG07 TOUCH test instrument case

Scope of delivery of the set

Wireless pressure sensor
USB charging cable and USB charger

Art. No. 70130

WPS KABEL – High-pressure sensor (cable to measuring device)

Item no. 70115

External cable pressure sensor for test pressures from 0.3 to 20.0 bar, test medium water or air, suitable for RAU LM06 and DPG02 TOUCH or DPG07 TOUCH measuring devices. Application Leak and load testing on pipes up to 20 bar: Leak and stress test of drinking water installations, heating and solar systems with compressed air, inert gas or water. Long-term measurements with freely selectable interval time.

Leak and stress test of water pipes with water or air as a medium in accordance with DIN EN 806-4 from 0.15 bar (0.015 MPa) up to a maximum of 20 bar (0.2 MPa)
External pressure sensor suitable for LM06, DPG02 and DPG07 TOUCH
Measuring armature with 3 meter USB cable for secure data transmission

Scope of delivery

Cable pressure sensor

Art. No. 70115

Shut-off bladder DN 300

Item no. 76089

Shut-off bladder DN 300, robust and hard-wearing design Can be loaded up to max. 0.4 bar RAU Shut-off bladder DN 300 mm, for APS SOFT Art. No. 76089

Absperrblase DN 250

Item no. 76088

Shut-off bladder DN 250, robust and hard-wearing design Can be loaded up to max. 0.4 bar RAU Shut-off bladder DN 250 mm, for APS SOFT Art. No. 76088